• Meters

     

 

Types of Meters

 
 

 

LCR Meters
 Model No. Model Type Test frequency Measurement modes Accuracy Test level DC Bias
SM6015A
Hand Held 100 Hz, 120 Hz, 1 kHz and 10 kHz L,C,R,Z,D,Q,R,Theta,ESR 0.25% 0.6 Vrms -
SM6016
Hand Held 100 Hz, 120 Hz, 1 kHz, 10 Hz, and 100 kHz L,C,R,Z,D,Q,R,Theta,ESR 0.1% 0.3 Vrms, 0.6 Vrms, 1 Vrms -
SM5118
Benchtop 100Hz/ 1kHz L, C, R, Z, Q, D, theta 0.25% 0.3 Vrms 2V
SM6019
Benchtop 100Hz to 25kHz L+Q, C+D, R+Q, IZI+q, R+X, G+B, N+q, N-1 +q, Vs+Vp, M, L+AL 0.20% 0.05 – 0.5 Vrms 2V
SM6020
Benchtop 100Hz to 25kHz L+Q, C+D, R+Q, IZI+q, R+X, G+B, N+q, N-1 +q, Vs+Vp, M, L+AL 0.20% 0.05 – 0.5 Vrms 2V
SM6023
Benchtop 50Hz to 100kHz L, C, R, |Z|, |Y|, X, B, G, D, Q, theta, DCR 0.05% 10 mV - 2Vrms -
SM6024
Benchtop 20Hz to 200kHz L, C, R, |Z|, |Y|, X, B, G, D, Q, theta, DCR 0.05% 10 mV - 2Vrms 0 - 5V
SM6025
Benchtop 20Hz to 300kHz L, C, R, |Z|, |Y|, X, B, G, D, Q, theta, DCR, Vdc-Idc 0.05% 10 mV - 2Vrms 0 - ±5V/ 0 - ±50mA
SM6026
Benchtop 20Hz to 1MHz L, C, R, |Z|, |Y|, X, B, G, D, Q, theta, DCR, Vdc-Idc 0.05% 10 mV - 2Vrms 0 - ±5V/ 0 - ±50mA
SM6028
Benchtop 20Hz-2MHz Cp-D, Cp-Q, Cp-G, Cp-Rp, Cs-D, Cs-Q, Cs-Rs Lp-D, Lp-Q, Lp-G, Lp-Rp, Lp-Rdc, Ls-D, Ls-Q, Ls-Rs, Ls-Rdc, Rdc R-X, Z-qd, Z-qr, G-B, Y-qd, Y-qr, Vdc-Idc 0.05% 5mv-2V 0V to ± 10V
SM6028H
Benchtop 20Hz-2MHz Cp-D, Cp-Q, Cp-G, Cp-Rp, Cs-D, Cs-Q, Cs-Rs Lp-D, Lp-Q, Lp-G, Lp-Rp, Lp-Rdc, Ls-D, Ls-Q, Ls-Rs, Ls-Rdc, Rdc R-X, Z-qd, Z-qr, G-B, Y-qd, Y-qr, Vdc-Idc 0.05% 5mv-15V 0 - ±40V
SM6028A
Benchtop 20Hz-1MHz Cp-D, Cp-Q, Cp-G, Cp-Rp, Cs-D, Cs-Q, Cs-Rs Lp-D, Lp-Q, Lp-G, Lp-Rp, Lp-Rdc, Ls-D, Ls-Q, Ls-Rs, Ls-Rdc, Rdc R-X, Z-qd, Z-qr, G-B, Y-qd, Y-qr, Vdc-Idc 0.05% 5mv-2V 0V to ± 10V
SM6033 Series
Benchtop 20Hz to 1MHz (Z), (Y), C, L, X, B, R, G, D,Q, θ, DCR, Vdc-Idc 0.01% 5 mV to 10 Vrms 0V - ±10V/ 0mA to ±100mA
SM6027A DC bias For LCR Meter
Benchtop Upto 2MHz Provide 0-20A of constant current output

 

Digital Multimeters
 Model No. Counts Measuring function Interface
SMM5055
200000 AC/DC Voltage, AC/DC Current, 2/4 Wire Resistance, Capacitance, Continuity Test, Diode Test, Temperature, Frequency, Period, Minimum/Maximum, Average, Standard Deviation, dBm/dB, relative Measuremnt, Pass/Fail Hostogram Trending, Bar Chart, Data logg USB Device, USB Host, LAN
SMM5065
2200000 AC/DC Voltage, AC/DC Current, 2/4 Wire Resistance, Capacitance, Continuity Test, Diode Test, Temperature, Frequency, Period, Minimum/Maximum, Average, Standard Deviation, dBm/dB, relative Measuremnt, Pass/Fail Hostogram Trending, Bar Chart, Data logg USB Device, USB Host, LAN

 

Power Meters
 Model No. Measurement modes Voltage range Current Range Power Range
SME1311
AC, DC, Power 5V - 600V 10mA - 20A 0.01W - 12kW
SME1312
AC, DC, Power, Harmonic Analysis 5V - 600V 10mA - 20A 0.01W - 12kW
SME1321
AC, DC, Power, Harmonic Analysis 5V - 600V 1mA - 2A 0.01mW - 1.2kW
SME1331
AC, DC, Power, Harmonic Analysis 5V - 600V 10mA - 40A 0.01W - 24kW

 

DC Resistance Meters
 Model No. Display Digits Measurement range Accuracy: Resolution Sample rate
SME1402
4 1/2 1µΩ –2MΩ 0.05% 1uΩ 50samps/sec
SME1402B
4 1/2 10µΩ –20kΩ 0.05% 1uΩ 50samps/sec
SME1415
5 1/2 0.1µΩ-100MΩ 0.01% 0.1uΩ 100samps/sec

 

Selective Level Meter
 Model No. Frequency Range Inputs Input design Functions
SLM3505
5Hz to 5MHz 1 x 10Vpk 1MΩ 1 x 10Vpk with (3 x selectable Ω) 1 x 100Vpk 50Ω 1 x 300Vpk 1M Ω 1 x unbalanced pair ±300Vpk isolated Selective Level Meter, RMS Voltmeter (AC only), Signal generator, Impedance analyzer, Oscilloscope, VSWR
SLM3505- E
5Hz to 5MHz High input- ±300Vpk (1MΩ ±5% // 30pF) Low input- ±10Vpk (75Ω±1% // 30pF-1MΩ ±5% // 30 Differentially isolated & isolated BNC Selective Level Meter, Frequency Response Analyzer, Signal generator, Impedance analyzer, Oscilloscope, VSWR Meter

 

Battery Tester
 Model No. Max. input voltage Parameter Basic Accuracy Range mode
SME1403 / 65 V
65 V R, V, R–V, Z– θ˚, Z–θr, L–Q, L–R, R–X, R–Q R: 0.1%, V: 0.05% Auto, hold
SME1403A / 350 V
350V R, V, R–V, Z– θ˚, Z–θr, L–Q, L–R, R–X, R–Q R: 0.1%, V: 0.05% Auto, hold

 

Insulation Resistance Meters
 Model No. Measurement range Test Voltage Voltage Accuracy Comparator
SME1202A
100kΩ – 10TΩ 1V - 1000V ≥10V:1% ± 1V, <10V: 10% ± 0.1V 4-bin comparison function: 3 bins for PASS, 1 bin for FAIL
SME1202B
100kΩ – 10TΩ 1V - 500V ≥10V:1% ± 1V, <10V: 10% ± 0.1V 4-bin comparison function: 3 bins for PASS, 1 bin for FAIL